Cooler Master, in partnership with Murata, is developing the world’s smallest vapor chamber cooler, which is just a little thicker than human hair. In other words, that’s just 200 micrometers tall. This vapor chamber is planned to be a full replacement for standard heat pipe air coolers in devices such as smartphones, tablets, and laptops.

Cooler Master noted in its reveal that microchip processors, whether that be CPUs, chipsets, GPUs, or other types of processors, are becoming so small that conventional cooling is becoming inadequate for them. More specifically, coolers that use regular heat pipes are becoming incapable of transferring enough heat away from our modern tiny microchip processors, simply because they are too large.

This is mostly a problem in more compact devices, like phones, tablets, and laptops. For now, at least, standard desktop computers don’t really have this issue, since they don’t have the same size constraints as other devices.

The new vapor chamber cooler from Cooler Master aims to solve the problems of conventional cooling on small devices by using vapor chamber technology instead of heat pipes. The beauty of vapor chambers is that they use liquid instead of air alone to cool heat source. Liquid has more mass than air, allowing it to soak up more energy (i.e. heat).

Vapor chambers work in a similar way to water cooling in that the cooling system is filled with a fluid that is responsible for transferring heat away. When the fluid makes contact with a lot of heat, it turns into a vapor causing the mass to move in another direction, preferably where a heatsink is located. Once that vapor cools off, it turns back into liquid causing the fluid to change direction.

In layman’s terms, the liquid in a vapor chamber cooler acts like its own pump in a liquid cooling system, flowing mass from the heat source to the cooling source and back to the heat source.

But, the biggest benefit with Cooler Master’s ultra thin vapor chamber cooler is its 200 micrometer size. It’s so small that it’s almost guaranteed to fit in any device you can think of, whether that be a smartphone, tablet, 2-in-1 laptop or anything else that requires a very thin cooler.

Cooler Master and Murata will be cooperating in building this new heatsink device, and Cooler Master will go out of its way to build brand new testing facilities with the same conditions as Murata’s facilities to ensure development goes smoothly. The testing facilities will be completed in the second half of 2021 so depending on how the development and testing goes, we could see a product release sometime in 2022 or 2023.