When Fractal Design launched its Meshify 2 chassis, it impressed us so much that we had no choice but to award it a rare five stars. So you can imagine that I was quite excited when the company reached out asking if I wanted to review the new Meshify 2 Compact. In essence, it’s the same case but a little shorter, cutting back on the extreme storage or radiator setup possibilities, but offering the same basic design.
Because of this, the Meshify 2 Compact is arguably the more mainstream case suited to standard ATX setups that don’t need a ton of space – the vast majority of gaming systems. However, priced at $110, it’s not the most budget-friendly option, and it’s competing in a crowded segment. Let’s find out if Fractal Design has what it takes to earn yet another spot on our Best PC Cases list.
Specifications
| Type | Mid-Tower ATX |
| Motherboard Support | Mini-ITX, Micro-ATX, ATX |
| Dimensions (HxWxD) | 18.7 x 8.3 x 16.8 inches (474 x 210 x 427 mm) |
| Max GPU Length | 14.2 inches (360 mm) |
| CPU Cooler Height | 6.7 inches (169 mm) |
| Max PSU Length | 6.5 inches (165 mm) |
| External Bays | ✗ |
| Internal Bays | 2x 3.5-inch |
| 2x 2.5-inch | |
| Expansion Slots | 7x |
| Front I/O | 2x USB 3.0, USB-C, 3.5 mm Headphone, 3.5mm Mic |
| Other | (Removable) Tempered Glass Panel |
| Front Fans | 2x 140mm (Up to 2x 140mm, 3x 120mm) |
| Rear Fans | 1x 120mm (Up to 1x 120mm) |
| Top Fans | None (Up to 2x 140mm) |
| Bottom Fans | None (Up to 1x 120mm) |
| Side Fans | ✗ |
| RGB | No |
| Damping | No |
| Warranty | 1 Year |
Features
Image 1 of 4
Image 2 of 4
Image 3 of 4
Image 4 of 4
For this review, I asked Fractal Design to send us the gray option as I was curious to see how this color option would turn out. We had already seen the black color on the full-size Meshify 2, and white wasn’t available just yet.
Circling around the case, it’s immediately clear that this is a Fractal Design chassis – if not from the ‘Fractal’ text on the front mesh’s door handle, you can tell from the folds in the mesh and the grille pattern that’s also unique to Fractal Design.
The sheet metal isn’t particularly thick, nor is this a heavy case. If you’re after a tank-type case, perhaps the Lian Li Lancool II Mesh is more up your alley. But the thin sheet metal here is only really noticed when you’re handling the case. Once sat in place, the Meshify 2 Compact looks like a quality piece of kit and the design efforts stand out beautifully.
That being said, Fractal Design goes out of its way to make the case look good, almost to a fault. At the top IO, you’ll note that the tolerances between the removable top panel and the ports and buttons is extremely tight. This looks great, and for the ports it isn’t an issue, but it’s a little bit problematic on the power button. Our sample had a sticky power button. If you pressed it near the top, the button would get stuck in the down position – and yes, it did shut down our PC when we weren’t paying attention.
We didn’t experience this issue with the bigger Meshify 2, so it’s very possible that it’s something down to our sample. But if you have the same issue, don’t hesitate to ask Fractal Design for a fix . A sticking power button shouldn’t happen with any case, especially not one that costs $110.
Otherwise, top IO comprises discrete headphone and mic jacks, a USB Type-C port, and two USB 3.0 ports – all very complete.
To pull off the side panels, you simply pull them from the rear tab and take them off the case – it’s that easy. With that, we move on to the case’s internals.
Internal Layout
Image 1 of 3
Image 2 of 3
Image 3 of 3
When it comes to the interior layout of the Meshify 2 Compact, there’s very little worth mentioning – it’s all very industry standard with a main motherboard compartment with room for GPUs up to 13.4 inches (341 mm) long with the front fans installed (14.2 inches, or 360 mm without), CPU coolers up to 6.7-inches (169 mm) tall, two 3.5-inch drives in the PSU compartment and two 2.5-inch drives behind the motherboard tray.
What I also appreciate is the cable management system. The case comes with rubber grommets on almost all access points to the main compartment, which goes a long way to making things look tidy on the inside by hiding the clutter behind the motherboard tray.
Cooling
You can fit up to a 240mm AIO at the top of the case, along with up to a 360mm AIO at the front. The PSU shroud will be in the way of longer radiators on the intake, but it has removable pieces to make space for bigger coolers. Just note that if you do install a large radiator at the front, you’ll have to bump the HDD tray to make space. That said, 280mm radiators will fit fine without this sacrifice.
Of course, the Meshify 2 Compact’s strength is in cooling. The chassis comes from the factory with two 140mm fans on the intake and one 120mm fan at the rear exhaust, which is very complete indeed. That’s more than most cases, but it should be for $110.
Image 1 of 2
Image 2 of 2
Filtration is provided on every possible intake location, including the top exhaust. The front filter is easily removed by swinging the door open, pulling it out of its hinge, and then removing the filter. You can access the top filter by pulling off the top panel from the rear.
Another detail we appreciate is the bottom filter, as it’s removable from the front of the case. If you’re like us and have the back of your PC stuck near a wall, you know how annoying it can be to have to move the entire chassis to get to the PSU’s filter.