SilentiumPC has now introduced a brand new range of PC cases to the public. The new Ventum VT2 line-up offers an entry-level price of just under 32 euros. One of the most striking design features is the large front panel with rounded edges, which is made almost entirely of mesh and is intended to allow an unobstructed flow of air. In addition, most of the top is covered with a magnetic mesh mat.

According to the manufacturer, all four versions of the Ventum VT2 PC case offer space for AIO water cooling with radiators from 120 up to 360 mm. The maximum height of the CPU cooler must not exceed 159 mm. When it comes to graphics cards, models with a length of up to 290 mm can be installed. Up to two 2.5-inch drives and an additional 2.5-inch or 3.5-inch drive can be installed in the lower compartment using vibration-damping rubber buffers. The division of the interior into two chambers should have a positive influence on the air flow inside the housing and enable even easier cable routing.

With the larger Ventum VT2 models, such as the TG ARGB and EVO TG ARGB, the manufacturer is expanding the scope of delivery with ARGB fans and a side panel made of hardened glass. All four Ventum VT2 models can accommodate up to three fans in the front, two in the top panel and one more on the rear. The base model Ventum VT2 is delivered with a pre-installed Sigma HP 120 – mm CF case fan in the back. There are removable dust filters both above and below the case.

The top model of the series also has a large side panel made of tempered glass and three pre-installed Stella HP ARGB 120 – mm CF case fan. The nano-reset ARGB controller is pre-installed in the housing and offers various effects and color schemes. The housing was also equipped with a splitter for a total of five ARGB devices and five fans. In addition to ASRock’s Polychrome Sync, the supported ARGB systems also include ASUS ‘Aura Sync and MSI’s Mystic Light.

With the Ventum VT2 TG ARGB, the manufacturer has installed a Pulsar HP ARGB 120 – mm CF fan and a Sigma HP 120 – mm CF case fan installed on the front. Thanks to the auto-LED function, it is possible to use a rainbow effect without the need for a controller or a compatible motherboard. The supported ARGB systems include ASRock’s Polychrome Sync as well as ASUS ‘Aura Sync and MSI’s Mystic Light as well as Gigabytes RGB Fusion 2.0.

Similar to the base model, the Ventum VT2 TG has a Sigma HP 120 – mm CF case fan has been installed in the rear. There is also another Sigma HP 120 – mm CF fan in the front. In addition, a side panel made of hardened glass is used instead of the usual metal side panel.

All four PC cases of the Ventum VT2 series are available in stores from today.

The SilentiumPC Ventum VT2 is priced at around 32 euros. For the Ventum VT2 40 euros are due. The Ventum VT2 TG ARGB costs 43 euros and the Ventum VT2 EVO TG ARGB 53 euros.