Inno3D GeForce RTX 3090 iChill X4 is the flagship graphics card in the manufacturer’s offer. Powered by NVIDIA GA chip 102 with 10496 CUDA cores, available 24 GB of GDDR6X VRAM. Thanks to the use of 384 – bit bus, its bandwidth reaches 936 GB / sec. The manufacturer has equipped the whole with an extensive, proprietary cooling system iChill X4, which occupies three slots in the housing. In return, it is supposed to offer above-average performance. The Inno3D GeForce RTX card 3090 iChill X4 is already available in domestic stores. However, its availability is somewhat limited. Willing, with a bit of luck, they can hunt it for about 7999 PLN.

The Inno3D GeForce RTX 3090 iChill X4 graphics card has just appeared in stores. However, its availability is somewhat limited. Those willing, with a bit of luck, can hunt her for about 7999 PLN.

“src =” https://www.purepc.pl/image/news/2020 / 10 / 15 _ inno3d_geforce_rtx _ 3090 _ ichill_x4_flag_graphic_card_price_0.jpg “>

Inno3D GeForce RTX 2060 – additional NVIDIA Ampere graphics cards

Eight heat pipes, four fans and a half the heat exchange surface compared to the previous generation coolers allowed to raise the clocks above the reference values. And so in the boost mode the graphic core is to reach 1755 MHz instead of standard 1650 MHz. If this turned out to be not enough for someone, the manufacturer recommends a rebuilt TuneIT application that allows you to overclock and change fan curves. You can also modify programmable RGB backlight settings from there However, if someone does not want anything extra Inno3D GeForce RTX 3090 iChill X4 can be controlled from the motherboard software.

Inno3D GeForce RTX Test 2060 – Enough for ray tracing with DLSS?

The manufacturer declares full compatibility with LED systems of popular manufacturers, including . Aura Sync (ASUS), Mystic Light (MSI) or RGB Fusion (Gigabyte). In addition to adequate space in the case, the Inno3D GeForce RTX graphics card 3090 iChill X4 requires a lot of power. The design has two 8-pin connectors, and the power supply 750 recommended, necessary minimum. In return, however, the equipment is to repay with great performance, offering smooth gameplay in 4K quality with enabled visual effects such as Ray Tracing (tracking light rays). Below are the most important technical data of the structure:

Technical data of Inno3D GeForce RTX 3090 iChill X4:

• GPU: GA 102 (10476 CUDA cores)
• Boost mode core clock: 1755 MHz
• Graphics memory: 24 GB GDDR6X
• Graphics memory bandwidth: 19, 5 Gbps
• Bus: 384 – bit
• Video outputs:
  
  HDMI 2.1
  
  3 x DisplayPort 1.4a
• Max. Resolution: 7680 x 4320 px
• Interface: PCI-E 4.0 x 16
• Dimensions:
  
  length: 300 mm
  
  width: 135 mm
  
  height: 3 expansion slots
• Power supply: 2 8-pin plugs, power supply min. 750 In

Source: Inno3D